Taillight wiring

I put together my LED taillight tonight.  Total cost was about $30.

I reused the stock lens, trim ring, and reflector, but I dremeled out the reflector so that I could snugly fit a Radiantz 1.85" LED puck ($25) inside.  I also dug up a white LED cluster ($5) for the tag light that I had laying around from an old project.  Then I used a little bit of epoxy putty to fix the LED puck in place.  The puck already had super strong adhesive on the back, so I just used that to hold the tag light in place.

I try to use these LED pucks on all my bikes - they are by far the brightest LED brake lights I've encountered, and I've tried a lot of them.